Standard Specification
Construction
The gates are manually operated and built from double channel steel vertical pickets connected by lattice bars. All gates are prepared to take a swivel beak lock to accept padlocks by others.

Finish
Grey Hammer Finish

Gate Types
Top Hung Gates
A top hung gate should be used wherever possible due to its superior operating capabilities. Single gates up to 2500mm high and/or 3000mm wide are suspended from a flat bar top track. This is fixed at each end and has a rounded top edge to facilitate operation. Larger gates have a box type top track. Top hung gates incorporate channel bottom tracks set into the floor.
Size parameters
Maximum Height: 4000mm
Maximum Width:
Single: 4000mm
Pair: 8000mm

Bottom Rolling Gates
These gates are run on a flat bar bottom track which can be folding or portable for smaller openings. Where the gate is required to hinge aside when bunched, a "T" section top track is used. Pulleys at the base of the pickets support the weight of the gate. Hinging aside is not available when the opening size exceeds 1500mm wide or 3000mm high.
Size parameters
Maximum Height: 3000mm
Maximum Width:
Single: 1500mm
Pair: 3000mm

Spearhead Gates
Pointed spearheads can be attached to top pickets to offer climb over protection where lintels are not available for head fixings. Spearhead gates run on a flat bar bottom track, which is folding or portable. The top track is a folding or portable flat bar.
Pulleys at the base of the pickets support the weight of the gate. Pairs are supplied with removable centre post and fixing stay.

 

 

 

 

 

 

 

 

Size parameters
Maximum Height: 2000mm
Maximum Width:
Single: 1500mm
Pair: 3000mm

Gate Arrangements
Collapsible gates are supplied:
· To fit between jambs
· To fit underneath the lintel
· Face fixed internally to the structure
· Face fixed externally to the structure
Gates are supplied single (bunching to one side) or in a pair, i.e. bi-parting.

Options
The following are available on all gates unless otherwise stated:
1 Locking - Hook bolt lock.
2 Finish - Polyester powdered coated to a range of BS or RAL colours.
3 Plated Leading Edge - For increased strength and security.
4 Mid Bar Gates For Reduced Centres - Normally 150mm.
5 Parallel Bunch - For limited bunch problems
6 Floating Gates - Top hung only.
7 Galvanised Finish

Benefits
· Minimum Side Bunching
· Minimum or no headroom requirements
· See-through Security
· Ram raid protection when fitted with top and bottom tracks

· Smooth and easy operation.
· Low maintenance.
· Attractive flush appearance.
· High rust resisting properties.
· Available in a range of colours.
· Insulated panels.
· Adjustable top and bottom seals.
· High wind resistance

 

 

 

 

 

 

 

Collapsible Gates
Collapsible Gates provide high security against vandals, burglars and other intruders. Collapsible Gates are specified for use on underground stations, car parks and in a wide range of commercial situations where the ability to see through the gate not only deters criminals, but also provides optimum ventilation.

All gates are custom made for individual openings and can be supplied top hung or bottom rolling with the optional facility to be hinged aside for locations on shop entrances, window protection and small openings where a clear width is of premier importance.

 

 

 

">